CIS-1000 Card dispenser with encoder and collector
The CIS-1000 Card dispenser with collector and encoder for RFID cards ISO 14443. This encoding station was developed for high amount card encoding. This device can read and encode magnetic, chip and RFID cards. The cards are filled in the dispenser, then are processed in the encoder and after that transfered into the collector. Each card magazine has a capacity of 500 cards (0,76 mm). In case a card is defective, this card will be sorted out and put in a capture card box. The integrated sensors gives warning if a magazine is full or empty. This encoding station is available with an RS-232 interface.
- CIS-1000 encoding station for magnetic, chip and RFID cards.
- With card dispenser and collector, each 500 card capacity.
- Defecitve cards can be sorted out with the card capture function.
- This cards are stored in a separate box.
- Integrated sensors monitors magazines full or empty.
- Available with the interface RS-232.
|Model/Type||CIS-1000 Encoding station|
|Card thickness||0,22 – 1,0 mm|
|Card size||ISO 7810
85,725 x 53,975 mm
|Magnetic cards||ISO 7811
3 track reading + encoding
LoCo optional HiCo
|Chip cards||ISO 7816
reading + encoding
Mifare or comp.
|Card magazine capacity||Card dispenser : 200, 300, 500
Card collector: 200, 300, 500
|Card empty sensor||Yes||Card dispenser|
|Magazine full sensor||Yes||Card collector|
|Card capture function||Yes|
|Capture card box||Yes (30 cards )||for defective cards|
|Capture card box sensor||Yes|
|Dinemsions||Magnetic, Chip, RF
200 cards 154 x 652 x 283 mm
300 cards 154 x 652 x 359 mm
500 cards 154 x 652 x 503 mm
200 cards 154 x 625 x 296 mm
300 cards 154 x 625 x 372 mm
500 cards 154 x 625 x 516 mm
|Power consumption||DC 24V (+-5%)|