Project Description

CIS-2000 Card dispenser with encoder and collector


The CIS-2000 card dispenser with encoder for magnetic, chip and RFID cards and card collector. This encoding station is suitable for high amount card processing. The two exchange cartridges enables a quick and easy filling/emptying of the device. With 500 cards capacity (0,76 mm) for high speed card processing.

For card encoding, the cards are filled into the dispenser, transfered into the encoder, checked and forwarded into the collector. If a card is defective, it will be sorted out by the card capture function of the device. This card will be store in a separate box. The integrated sensors gives warning in case a card magazine is empty/full. Available with the interface RS-232.

  • CIS-2000 Kartenspender mit Kodierer und Sammler CIS-2000 Card dispenser

  • CIS-2000 card dispenser, encoder and card collector.
  • This encoding station is suitable for magnetic, chip and RFID cars.
  • Optionally also available with housing.
  • With build in sensors for card level monitoring.
  • With card capture function for defective cards.
  • Separate box for sorted out cards (capture card box).
  • Available with the interface RS-232 .

Description Note
Model/Type CIS-2000 Card encoding station
Card magazine Exchange cartridge
Card transportation Roller
Card thickness 0,22 – 1,0 mm
Card size ISO 7810

85,725 x 53,975 mm

Magnetic cards ISO 7811

3 tracks reading + encoding

LoCo optional HiCo

Chip card ISO 7816, 8 Kontakte

tracks reading + encoding

RFID cards ISO 14443A

Mifare oder komp.

tracks reading + encoding

Card magazine capacity Card dispenser: 200, 300, 500

Card collector: 200, 300, 500

Interface RS-232
Card empty sensor Yes Dispenser
Magazine full sensor Yes Collector
Card capture function Yes
Capture card box Yes (30 cards) defective cards
Sensor capture card box Yes
Dimensions 200 cards 168 x 625 x 339 mm

300 cards 168 x 625 x 415 mm

500 cards 168 x 625 x 568 mm

Power consumption DC 24V (+-5%)